VANQ THCMax Bloom UVB LED Grow Light

Made of 16W T5 UVB tubes+28W Far Red Led, will provide you a perfect 5ft * 5ft coverage, The UVB and far red will help master growers effectively increase hemp yield and quality, UVB & Far Red can work seperately, growers can set based on their own method.

Features:

Professional UVB+UVA + 730nm Far Red

3 different operating modes: UV Only/Far Red Only/ UV+Far Red

Hundreds of different timer working modes

Modular Design;High Reliability;Easy Maintenance/Replacement;Daisy-Chain Function；Timer For Group Control

Certificates:CE,RoHs

SPEC SHEET

VANQ THCMax Bloom UVB LED Grow Light

Features:

Professional UVB+UVA + 730nm Far Red

3 different operating modes: UV Only/Far Red Only/ UV+Far Red

Hundreds of different timer working modes

Modular Design;High Reliability;Easy Maintenance/Replacement;Daisy-Chain Function；Timer For Group Control

Certificates:CE,RoHs

SPEC SHEET

THCMax Bloom Light Parameter

Model			VQ-GLCP-044UF	VQ-GLCP-016UF
Electric parameter	Rated input voltage		110V/220VAC 50/60HZ
	Total Power		44w±5%	16w±5%
Light Source Parameter	Infrared light	Light Source	LED	*
		Specification	3535SMD	*
		LED QTY	28PCS	*
		Power	28*1=28W	*
	Ultraviolet light	Light Source	Fluorescent lamp	Fluorescent lamp
		Specification	T5	T5
		lamp QTY	2PCS	2PCS
		Power	2*8=16W	2*8=16W
Net Weight			1.6kg	1.6kg
Features			FR and UV light	Only ultraviolet UV light
Manual attention			!Can not be used alone, to be connected with the time switch of THCMax Bloom light, installed onto the main lamps for application.

UV+FR Spectrum

UV+FR Function

1、Reduce fungi,molds and plant pests ,Boost THC content；

2、Useful for the plant fruit coloring and vitamin C；

3、Promote photosynthetic efficiency,short flowering cycle；

4、Improve crop quality,Increase yield up by 20-25%.；

UVB Spectrum

UVB Function

1、Reduce fungi,molds and plant pests ,Boost THC content；

2、Useful for the plant fruit coloring and vitamin C；

THCMax Bloom Light Parameter

Model			VQ-GLCP-044UF	VQ-GLCP-016UF
Electric parameter	Rated input voltage		110V/220VAC 50/60HZ
	Total Power		44w±5%	16w±5%
Light Source Parameter	Infrared light	Light Source	LED	*
		Specification	3535SMD	*
		LED QTY	28PCS	*
		Power	28*1=28W	*
	Ultraviolet light	Light Source	Fluorescent lamp	Fluorescent lamp
		Specification	T5	T5
		lamp QTY	2PCS	2PCS
		Power	2*8=16W	2*8=16W
Net Weight			1.6kg	1.6kg
Features			FR and UV light	Only ultraviolet UV light
Manual attention			!Can not be used alone, to be connected with the time switch of THCMax Bloom light, installed onto the main lamps for application.

UV+FR Spectrum

UV+FR Function

1、Reduce fungi,molds and plant pests ,Boost THC content；

2、Useful for the plant fruit coloring and vitamin C；

3、Promote photosynthetic efficiency,short flowering cycle；

4、Improve crop quality,Increase yield up by 20-25%.；

UVB Spectrum

UVB Function

1、Reduce fungi,molds and plant pests ,Boost THC content；

2、Useful for the plant fruit coloring and vitamin C；

UVB band light radiation distribution test

Unit:μW/c㎡

Time Switch Functions

Support 16 different timers , each timer support 15 different repeat modes

Time Switch Operating Instructions

Timers	1	2	3	4	5	6	7	8	9	10	11	12	13	14	15	16
	00:00-24:00
CHANNELS	CH1（FR)								CH2(UV)
Repeat Mode	①Mon. ②Tue. ③Wed. ④Thur. ⑤Fri. ⑥Sat. ⑦Sun. ⑧Mon.Wed.Fri. ⑨Tue.Thur.Sat. ⑩Sat.Sun ⑪Mon.Tue.Wed ⑫Thur.Fri.Sat. ⑬Mon.Tue.Wed.Thur.Fri. ⑭Mon.Tue.Wed.Thur.Fri.Sat. ⑮Mon.Tue.Wed.Thur.Fri.Sat.Sun
Attention:	Different Working timers can work at the same time, make sure the times do not conflict each other, If you do not want any timer on, please set working times ON –:–/OFF –:–
–
Example 1:	I want the bloom light UV&FR on 18:00-19:00 of Monday-Thursday, and 22:00-23:00 Of Sunday
Solution:	Step 1:Select any 2 Timers from”Timer 1- Timer 16″ , For example, Timer 1 & Timer 2
	Step 2:Set Timer 1 ON 18:00 / OFF 19: 00 ,Repeat Mode as Mode ④.(Both Channels CH1&CH2 ON)
	Step 3:Set Timer 2 ON 22:00 / OFF 23: 00 ,Repeat Mode as Mode ⑪.(Both Channels CH1&CH2 ON)
Example 2:	I want the bloom light only FR on 17:00-19:00 of Monday-Wednesday, and only UV On 22:00-23:00 Of Saturday
Solution:	Step 1:Select any 2 Timers from”Timer 1- Timer16″ , For example, Timer 3 & Timer 4
	Step 2:Set Timer 3 ON 17:00 / OFF 19: 00 ,Repeat Mode as Mode ⑪.(Channel CH1 ON Only)
	Step 3:Set Timer 4 ON 22:00 / OFF 23: 00 ,Repeat Mode as Mode ⑥.(Channel CH2 ON Only)

UVB band light radiation distribution test

Unit:μW/c㎡

Time Switch Functions

Support 16 different timers , each timer support 15 different repeat modes

Time Switch Operating Instructions

Timers	1	2	3	4	5	6	7	8	9	10	11	12	13	14	15	16
	00:00-24:00
CHANNELS	CH1（FR)								CH2(UV)
Repeat Mode	Mon. Tue. Wed. Thur. Fri. Sat. Sun. Mon.Wed.Fri. Tue.Thur.Sat. Sat.Sun Mon.Tue.Wed Thur.Fri.Sat. Mon.Tue.Wed.Thur.Fri. Mon.Tue.Wed.Thur.Fri.Sat. Mon.Tue.Wed.Thur.Fri.Sat.Sun
Attention:	Different Working timers can work at the same time, make sure the times do not conflict each other, If you do not want any timer on, please set working times ON –:–/OFF –:–
–
Example 1:	I want the bloom light UV&FR on 18:00-19:00 of Monday-Thursday, and 22:00-23:00 Of Sunday
Solution:	Step 1:Select any 2 Timers from”Timer 1- Timer 16″ , For example, Timer 1 & Timer 2
	Step 2:Set Timer 1 ON 18:00 / OFF 19: 00 ,Repeat Mode as Mode ④.(Both Channels CH1&CH2 ON)
	Step 3:Set Timer 2 ON 22:00 / OFF 23: 00 ,Repeat Mode as Mode ⑪.(Both Channels CH1&CH2 ON)
Example 2:	I want the bloom light only FR on 17:00-19:00 of Monday-Wednesday, and only UV On 22:00-23:00 Of Saturday
Solution:	Step 1:Select any 2 Timers from”Timer 1- Timer16″ , For example, Timer 3 & Timer 4
	Step 2:Set Timer 3 ON 17:00 / OFF 19: 00 ,Repeat Mode as Mode ⑪.(Channel CH1 ON Only)
	Step 3:Set Timer 4 ON 22:00 / OFF 23: 00 ,Repeat Mode as Mode ⑥.(Channel CH2 ON Only)